VDSL SLAVE Ethernet Terminal Up to 1900 m. and up to 25 Mb/s NVF-800S  

NVF-2400S VDSL IP DSLAM and NVF-200L for point to point links, together to from a cost-effective solution for services such as remote lecturing, telemedicine, video conferencing, Video-on-Demand (VoD), IP-TV etc. Internet access, and various high-speed data applications.

The front-panel provides LEDs indication of system and interface status. The built-in POTS/ISDN splitter allows a standard POTS phone or ISDN device to be connected. Full or half-duplex mode of LAN operations is automatically sensed and configured. VDSL link rates are configured by local IP DSLAM over the auto-speed function.

Therefore, NVF-200R supports auto-speed, plug & play operations on the subscriber-site, and are part of an ideal solution for delivering cost-effective, high-performance broadband/multimedia services to Multi-Dwelling Units (MDU) and Multi-Tenant Units (MTU) environments such as hotels, campus, hospitals and telecom.

Key Features & Benefits

·          Compliant with IEEE802.3 10BASE-T standard.

·          Compliant with IEEE802.3u 100BASE-TX standard.

·          Compliant with ETSI, ITU, ANSI standards.

·          Supports plug & play, you don't need to do any setting.

·          Supports 5M/15M/25Mbps per port symmetrical bandwidth over phone wiring with long driver capable 1.9/1.3/0.8 Km(6327/4333/2666 feet).

·          Supports 1 * RJ-11 connector for Ethernet over VDSL.

·          Supports 1 * RJ-11 connector for telephone/PBX connection.

·          Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX.

·          Support Auto-speed & full duplex for VDSL port.

·          Support console port for firmware upgrade and maintain

·          Voice and Data work on the same telephone line.

·          Spectral compatibility with xDSL, ISDN (2B1Q/4B3T).

·          Supports flow control IEEE802.3x for Full Duplex & Back Pressure for Half Duplex.

·          Supports long packet size up to 1536 Bytes.

·          Supports POTS/ISDN voice pass.

·          Supports 4wires phone set pass through.

·          Splitter on board

·          Supports Surge protection.

·          Provides Power LED.

·          Provides LED indication Link/Active Status for Ethernet port and Link for VDSL port.

·          External switching power adapter Input: AC 85-240 volts/50-60Hz; Output: DC 5V/1A or above.

·          Metal case & mini size design

·          Safety by CE, FCC

·          RoHS compliant

Specifications

·          VDSL Frequency Spectrum: 0.9MHz ~ 3.9MHz. Receiver: 4MHz ~ 7.9MHz

·          POTS/ISDN pass filter Spectrum: 0 ~ 630KHZ

·          Power Consumption: 5.4W

·          Operating Temperature: 0°C ~ 50°C (41F ~ 122F)

·          Storage Temperature: -20°C ~ 65°C (-4F ~ 149F)

·          Humidity: 10 to 90% (non-condensing)

·          Dimensions: 95 x 110 x 24 mm(3.74" x 4.33" x 0.94").

·          Weight: about 313.5g (net)