WLAN 802.11 b/g Signal Booster Model No: ARG-1105 series Indoor Fixed Gain Booster
ARG-1105 for 802.11b Indoor Booster Output Power: 100mW/200mW/500mW

Specification:
Output Power
200mW
500mW
Operating Range
2400 - 2500 MHz
Operating Mode
Bi-directional, half-duplex Time Division Duplex(TDD) Senses RF carrier from Transmitter and Automatically Switch receive to transmit mode
Transmit Gain
17dB Nominal (Spec. by customer)
Output Power
200mW (+23dBm) nominal
500mW (+27dBm) nominal
TX Input Power
6dBm nominal (Spec. by customer)
Receiver Gain
10dB typical
Noise Figure
3.5dB typical
Connector
SMA (50 ohm)
Power Consumption
360 mA ~ 420 mA
Operating Temp.
-20 to +70℃
Operating Humidity
Up to 95% relative humidity
Material
Die Casting Aluminum
Dimension (cm)
7.8cm(L) x 5.6cm(W) x 2.9cm(H)
Packaging
Single/Gift Box: 22cm(L) x 15cm(W) x 6cm(H) W/Booster, Power Adapter, Cable(30cm)
Safety Certification
FCC/CE/VCCI

Output Power: 100mW/200mW/500mW for 802.11g Specification:
Output Power
200mW / 23dBm nominal for 802.11g / 54Mbps 500mW / 27dBm nominal for 802.11g / 54Mbps
Operating Range
2400 - 2500 MHz
Operating Mode
Bi-directional, half-duplex, Auto-Switching via carrier sensing
Transmit Gain
12dB (Adjustable)
Frequency Response
+- 1dB over operating range
Optimal input power
7 -11 dBm
Receiver Gain
14dB typical
Receive Noise Figure
3.5dB typical
Connector
SMA receptacle (50 ohm)
Power Consumption
700mA
Operating Temp.
-20 to +70℃
Operating Humidity
Up to 95% relative humidity
Dimension (cm)
7.8cm(L) x 5.6cm(W) x 2.9cm(H)
Material
Die Casting Aluminum
Packaging
Single/Gift Box: 22cm(L) x 15cm(W) x 6cm(H) W/Booster, Power Adapter, Cable(30cm)
Safety Certification
FCC/CE/VCCI